Finden Sie schnell netzwerkabel für Ihr Unternehmen: 2048 Ergebnisse

Elektrische Messgrößenerfassung im Niederspannungsnetz mit messung der Wirkenergie und Phasenfolgekorrektur,... Messen : Wirkenergie (Kl.0,5) oder Blindenergie (Kl.2) Netzart : Wechselstromnetz, Elektrische Messgrößenerfassung im Niederspannungsnetz mit messung der Wirkenergie und Phasenfolgekorrektur,Diagnose Messen : Wirkenergie (Kl.0,5) oder Blindenergie (Kl.2) Netzart : Wechselstromnetz,

1. Seite: angespritzter USA-Hospitalstecker NEMA 5-15 2. Seite: angespritzte Zentralkaltgerätedose C13 1. Side: moulded on USA-Hospital plug NEMA 5-15 2. Side: moulded on straight “cold condition” connector C13 Kabeltypen/ Katalog-Nr. Cabletypes/ Catalogue-No. Sjt 3 x AWG18 sw/black 10 A 2,50 m/ 0L06821 Sjt 3 x AWG16 sw/black 13 A 2,50 m/ 0L06831 Sjt 3 x AWG16 sw/black 13 A 4,00 m/ 0L06822 Sjt 3 x AWG16 sw/black 13 A 5,00 m/ 0L06837 Sjt 3 x AWG14 sw/black 15 A 5,00 m/ 0L06839 andere Ausführungen und Längen auf Anfrage further variations and lengths by request

1. Seite: angespritzter Schutzkontakt-Winkelstecker Typ 303 A, 16 A, 250 V 2. Seite: anmontierte Heißgerätedose 155 °C, 10 A, 250 V, C15A 1. Side: moulded on angled plug type 303 A, 16 A, 250 V 2. Side: assembly on “hot condition” connector 155 °C, 10 A, 250 V, C15A Kabeltypen/ Katalog-Nr. Cabletypes/ Catalogue-No. H05RR-F 3G0,75 sw/black 2,00 m/ 0L06840 H05RR-F 3G1,00 sw/black 2,00 m/ 0L06841 H05RR-F 3G1,00 sw/black 3,00 m/ 0L06842 andere Längen auf Anfrage further lengths by request

Leistungs- und Netzanalysator mit hervorragenden Messleistungen und außergewöhnlich guter Bedienungsfreundlichkeit durch intuitive Funktionsweise. Messkanäle: 4U / 4I Eingänge: 5V / 4I Spannung (TRMS AC+DC): 2V bis 1000V Spannungsverhältnis: bis 500 kV Stromverhältnis: Bis 60kA Frequenz: 40Hz bis 69Hz Leistungen: W, VA, var, VAD, PF, DPF, cosφ,tanφ Energien: Wh, varh, VAh , VADh Oberschwingungsmessung: Ja THD: Ja, bis 50.Ordnung, mit Phasenlage Expert-Modus: Ja Flicker (Pst und Plt): Ja Unsymmetrie: Ja Aufzeichnung: Min/ Max-Erfassung Peak: Ja Phasendiagramm: Automatisch Anzeige: TFT-Farbbildschirm 1/4 VGA 320x240, Bilddiagonale 148mm Bildschirm-Kopien: 50 Elektrische Sicherheit: IEC 61010 1000V CAT III / 600V CAT IV Schutzart: IP53/IK08 Schnittstellen: USB Autonomie: bis zu 13 Stunden Stromversorgung: 9,6 V NiMH-Akku oder Netzteil

PRODUCT DESCRIPTION The voltage sensors of Type VxxxK-xx are commonly used in asymmetric T-connectors of different manufacturers. T-connectors use a blind plug to secure the T-connector in place after installation. Our sensors can be used instead of the blind plug in the T-connector and serve both to secure the T-connector in place and measure voltage. The sensor has a point for common earth connection, and an output cable for connection with an intelligent electronic device (IED). PRODUCT ADVANTAGES Passive components – No need for power supplies for internal active devices Short-form factor -Sensor is the length of a standard blind plug Robust design – Tightening cap made of solid aluminum, which can withstand an installation torque of up to 50Nm Compatible to asymmetric T-connectors from brands Nexans, Südkabel, Tyco and NKT Wide temperature range

PRODUCT DESCRIPTION The voltage sensors of Type VxxxB-xx is dedicated to the new T-connector of Euromold/Nexans, called (K)(M)480TB. T-connectors use a blind plug to secure the T-connector in place after installation. Our sensors can be used instead of the blind plug in the T-connector and serve both to secure the T-connector in place and measure voltage. The sensor has a point for common earth connection, and an output cable for connection with an intelligent electronic device (IED) PRODUCT ADVANTAGES Passive components – No need for power supplies for internal active devices Short-form factor – Sensor is the length of a standard blind plug Robust design -Tightening cap made of solid aluminum, which can withstand an installation torque of up to 50Nm Compatible to the new T-connector of Euromold/Nexans, called (K)(M)480TB Wide temperature range

PRODUCT DESCRIPTION The voltage sensors of Type VxxxAQ-xx are commonly used inside elbow connectors. The sensor has a point for common earth connection, and an output cable for connection with an intelligent electronic device (IED). PRODUCT ADVANTAGES Passive components – No need for power supplies for internal active devices Short-form factor – Sensor is the length as the elbow connector Compatible with many different Elbow-connectors Wide temperature range

PRODUCT DESCRIPTION The voltage sensors of Type V360C-xx are commonly used in T-connectors of different manufacturers. T-connectors use a blind plug to secure the T-connector in place after installation. Our sensors can be used instead of the blind plug in the T-connector and serve both to secure the T-connector in place and measure voltage. The sensor has a point for common earth connection, and an output cable for connection with an intelligent electronic device (IED). PRODUCT ADVANTAGES Passive components – No need for power supplies for internal active devices Short-form factor – Sensor is the length of a standard blind plug Robust design – Tightening cap made of solid aluminum, which can withstand an installation torque of up to 50Nm Compatible to T-connectors acc. IEC50181 up to 36kV, Type C connectors Wide temperature range