Finden Sie schnell prototyps für Ihr Unternehmen: 7 Ergebnisse

AUTO-Sequenz (Ra → RCD → Riso) Niederohmmessung mit >200 mA DC Isolationsmessung (L-PE / L-N / N-PE) Polarisationsmessung (PI & DAR) RCD Typ A, AC Netz- und Schleifenimpedanz Kurzschlussstrom mit OK / NO Anzeige Drehfeld Spannungsfall Interner Speicher und USB Anschluss Sicherheit nach CAT IV 300 V Die 3 neuen Modelle aus der COMBI Serie sind innovative und vielseitig einsetzbare Installationstester mit den grundlegenden Funktionen zur Prüfung elektrischer Anlagen und Installationen als auch E-Ladestationen. Stecker rein und einfach messen ⇒ Die neue Autosequenzmessung Ra → RCD → Riso macht´s möglich. Die Isolationsmessung gegen alle 3 Leiter (L-N-PE) und der große Speicher für 999 Messungen mit Speicherung auf 3 Ebenen + Textkommentar sind nur einige der vielen Highlights der neuen Modellreihe. Eine vom Benutzer abrufbares Hilfemenue für alle Messfunktionen bietet eine wertvolle Unterstützung beim Anschluss des Gerätes an die zu prüfende Anlage.

Suppentopf Gourmet 10l 230V

Isolierleiste EP GC 308 Verfahrenstechnik: Sägen, Fräsen Funktion: Isolierbauteil in Sterilisations - Autoklaven Distanzring PF CC 201 Verfahrenstechnik: Drehen Funktion: Konstruktionsteil in Hochtemperatur - Vakuumöfen Gelenkbuchse PF CC 202 Verfahrenstechnik: Fräsen Funktion: Konstruktionsteil im Textilmaschinenbau Schweißbacken PF CC 203 Verfahrenstechnik: Fräsen inkl. Metallinserts Funktion: Konstruktionsteil in Elektroschweißautomaten

3D ZEIT bietet hochwertigen FDM 3D-Druck für die Fertigung von Prototypen, Funktionsmodellen und Kleinserien. Dieses Verfahren eignet sich für eine schnelle und kosteneffiziente Produktion von Bauteilen aus verschiedenen Kunststoffen, darunter PLA, PETG und ABS. Egal, ob Sie einfache Formen oder komplexe Geometrien benötigen, unser 3D-Druck sorgt für präzise Ergebnisse und kurze Lieferzeiten. Ideal für Start-ups und Unternehmen, die eine flexible Fertigungslösung suchen.

ZWP gehört zu Deutschlands größten unabhängigen Lohnfertigern für Getriebeteile. Wir beliefern renommierte Unternehmen mit unseren Produkten aus unterschiedlichen Branchen. Hier ein Auszug über unsere Produktionsmöglichkeiten für Lohnfertigung: Innenverzahnte Zahnkränze gehärtet und geschliffen Modul bis 20 mm Durchmesser 100 bis 1.800mm Zahnräder bis 5 Tonnen innen- und außenverzahnt gehärtet und geschliffen Modul 2 – 50 mm Durchmesser 100 – 2.000 mm Verzahnte Wellen innen- und außenverzahnt gehärtet und geschliffen Modul 1 – 50 mm Durchmesser 50 – 500 mm Länge bis 1.500 mm Weitere Herstellungsarten auf Anfrage. Wir stellen nach Kundenzeichnung her. Renommierte Unternehmen beliefern wir bereits und exportieren weltweit . Wir verfügen über eine eigene Härterei. Dies spart Zeit und Kosten im Herstellungsprozess. Referenzen zu unseren Kunden Ihrer Branche auf Anfrage. Wir freuen uns auf Ihre Kontaktaufnahme.

0-100A output current True RMS metering with single cycle capture Auxiliary DC and AC output Multi-function auto-ranging timing system Current limit mode for fine control Automatic mains voltage selection Thermal and over-current protection The 100ADM mk5 Secondary Current Injection Test Set provides commissioning and maintenance engineers with a flexible system for testing protective systems. It has an easy to understand panel layout and a simple user interface. The status of every function can be seen at a glance, and there are no complex menus to navigate. The 100ADM mk5 keeps the familiar user interface of previous models but adds a new metering system that accurately measures the RMS of a single cycle. It also features a new current limit mode to provide very fine control of very low currents, even into low impedance loads. Current limit mode also assists in testing self-powered overcurrent protection as fitted to many 11kV ring main units. The unit has a range of outputs allowing injection of currents as low as a few mA and as high as 100A. Voltages up to 240V are available on the main outputs, allowing high impedance current relays and voltage relays to be tested. Four true RMS metering ranges are provided, allowing the full scale of the meter and trip level to be set independently of the selected output. Industry standard safety connectors are used on all inputs and outputs for convenience, reliability and safety. The 100ADM Mk5 Secondary Current Injection Test Set is comprehensively protected by overcurrent, duty cycle and thermal trips, and keeps the user fully informed of any trip condition. A stabilised DC supply is provided to power the relay under test, along with an independently switched and isolated 110V AC output. The back-lit display on the 100ADM mk5 is bright and clear with a wide viewing angle. The results of a test can be seen here as they appear on the display A very flexible two channel timing system is provided, allowing trip times, reset times and re-close times to be quickly measured to a high degree of accuracy. The timer auto-ranges to measure from 1ms to 99999.9s. The 100ADM can be used to test many types of single phase secondary protection including: 27/59 Over and under voltage relays 37 Under current 51 IDMT relays 50/76 Instantaneous overcurrent 59G Neutral voltage displacement 79 Auto-reclosers 2 Time delay relays 51G/50G Earth fault relays 67 Directional overcurrent (basic tests) 52 Miniature circuit breakers Tripping relays Thermal relays 90V Voltage regulating relays WEIGHT 23.9 kg DIMENSIONS 560 × 456 × 265 mm SUPPLIED ACCESSORIES Operating manual Mains lead Output lead set Spare fuses Carry strap OPTIONAL ACCESSORIES 100ADM-F, Part no. 006

0-100A output current True RMS metering with single cycle capture Auxiliary DC and AC output Multi-function auto-ranging timing system Current limit mode for fine control Automatic mains voltage selection Thermal and over-current protection The 100A/E mk3 secondary current injection test set has been designed to give the maintenance and commissioning engineer a large number of facilities in one self-contained instrument.The unit is portable, compact and simple to use. The mains supply for the unit is either 240V±10% or 115V +10% -6% at either 50 or 60Hz. Full load can be obtained at the supply voltage extremes. The current and voltage outputs are independently controlled and metered. The output current and voltage are displayed on large, clear panel instruments. An additional four range CT is provided, extending the ammeter range down to 0-100mA. All of the outputs are fully isolated by means of double wound transformers. The timing system on the 100A/E is very flexible, without compromising ease of use. Four modes of operation and two contact inputs are provided allowing for a wide range of events to be timed. Both contact inputs automatically select for normally open or normally closed contacts. Operation of the different timing modes is described overleaf. Internal start mode starts the timer when the ‘ON’ pushbutton is pressed, and stops the timer when the first contact set changes state. This mode is ideally suited to timing over-current relays. Single contact mode starts and stops the timer on the first and second changes of state of the first contact set, and dual contact mode starts the timer from the first set of contacts and stops it from the second set. These modes allow reset and re-close times of protective devices to be easily measured. The final mode of operation of the timer starts the timer when the current exceeds 20% of the selected metering range, and stops it when the current falls below 20%. This allows the timing of trips with no auxiliary contacts such as miniature circuit breakers. Automatic control has been provided such that all outputs can be switched off once the device under test has operated. The automatic control can be switched in or out of circuit for all outputs, enabling setting up procedures to be carried out. The instrument is housed in a robust case complete with a protective cover and fold-away carrying handles. The current output on the unit has eight ranges, allowing the selection of output voltages up to 150V and output currents up to 200A. The voltage output on the unit has three ranges, allowing the selection of output voltages up to 500Vac and 250VDC. If using a 100ADM-F with the 100A/E mk 3 unit you will need to to order A0006-0010 lead set. The output of the 100A/E mk3 secondary current injection test set is a true RMS analogue system with separate instruments for current and voltage. AC current is metered by a dual scaled ammeter reading 0-1A and 0-5A. AC voltage is metered by a dual scaled ammeter reading 0-300V and 0-600V. The output may be automatically switched off at the end of the test to safeguard the relay under test. This is available for both the voltage and current output. WEIGHT 33 kg DIMENSIONS 490 × 300 × 300 mm SUPPLIED ACCESSORIES Operating manual 2m Mains lead Non-latching contact lead 100AL lead set Spare fuses OPTIONAL ACCESSORIES 100ADM-F, Part no. 006 100A/E Filter, Part no. A0006-0010